Produktkategorien

Neue Produkte

Ersetzen Sie den Fleetguard-Hydraulikfilter HF6711 HF6137 HF6138 HF6721

Der Fleetguard Hydraulikfilter HF6711 entspricht Fleetguard HF6137, HF6138, HF6721, Donaldson P165878, P550252. Teilenummer: HF6711 Artikelname: Hydraulikfilter Marke ersetzen: Fleetguard
Hydraulikfilter HF28943 2er-Set Hochleistungs-Glasübertragungselemente

Der Fleetguard-Hydraulikfilter HF28943 entspricht Allison 29548988, 29558118, Baldwin PT9415-MPG-KIT, GMC 29506337, John Deere AT327883. Teilenummer: HF28943 Artikelname: Hydraulikfilter Marke ersetzen: Fleetguard
Luftfilter RS30223 Gehäuse 84286397 New Holland 84286397 Querverweis

Der Baldwin Luftfilter RS30223 entspricht Case 84286397, New Holland 84286397. Teilenummer: RS30223 Teilename: Luftfilter Marke ersetzen: Baldwin
Luftfilter P601280 Baldwin RS5478-FN Wix 49280 Querverweis

Der Donaldson Luftfilter P601280 entspricht Baldwin RS5478-FN, Wix 49280. Teilenummer: P601280 Teilename: Luftfilter Marke ersetzen: Donaldson
ersetzen Sie das Donaldson P182044-Außenluftelement mit langer Lebensdauer

Der Donaldson Luftfilter P182044 entspricht Fleetguard AF427M, Baldwin LL1895, Clark 1564734, Euclid 4005113, Steiger 45-213, Terex 4001155. Teilenummer: P182044 Teilename: Luftfilter Marke ersetzen: Donaldson
Donaldson P119371 Innenluftelement ersetzen

Der Donaldson-Luftfilter P119371 entspricht Fleetguard AF4820, AF822M, AF938, Baldwin PA1906, Euclid 4000823, Terex 9038408, CAT 3I-0124, 3I-0213, 8T-5603, 9Y-7802, Komoatsu 400594, MANN C1682. Teilenummer: P119371 Teilename: Luftfilter Marke ersetzen: Donaldson

NEUESTEN NACHRICHTEN

Replace oil and oil filter steps

1 Run the machine to warm up, stop and close the air outlet valve, and unscrew the fuel plug one turn to let the system relieve pressure. 2 Open the drain valve and drain the oil. After draining the oil, close the valve and transport the oil to the local waste oil treatment center. 3 Remove the oil filter. 4 Clean the oil filter holder, add lubricant to the gasket of the new oil filter, and tighten the oil filter by hand. 5 Remove the filler plug and refuel until the oil level reaches the plug. Retighten the filler plug. 6 Run the machine for a few minutes, stop, and wait a few minutes for the oil level to stabilize. Allow the system to relieve pressure by unscrewing the filler plug. Refuel until the oil level reaches the request and tighten the screw plug.